Skip to main content
Comfort Design Air Conditioning & Heating — HVAC in Port Aransas, TX
Learning Center · Coastal living

HVAC Settings for a Second Home or Rental While You're Away

This guide explains how to set your AC in an empty coastal home to help manage humidity while you are away.

Learn By the Comfort Design Air Conditioning & Heating team · Updated November 5, 2026

Quick answer

For an empty coastal home in warm weather, leave the AC on at a raised setting of about 80°F (below about 85°F) with the fan on AUTO. Turning the system off completely can let indoor humidity rise and mold grow while you are away.

Why Turning the Air Conditioning Off Backfires

Shutting down your cooling system in warm weather lets indoor humidity rise, which invites mold into your coastal home.

When a coastal home sits empty in warm weather, turning the system off can let humidity rise and mold grow. A cooling system does more than lower the air temperature; it also helps manage indoor moisture. Leaving the system on at a raised setting with the fan on AUTO keeps moisture in check while you are away.

The EPA recommends keeping indoor relative humidity between 30% and 50%, and below 60%, to limit mold growth. Without an active cooling system, humidity can easily exceed these levels during warm weather on the Gulf Coast. Maintaining a raised setting helps limit moisture until you return to your second home.

The Right Temperature Settings for Empty Homes

Leaving the system on at a raised setting helps manage indoor moisture while you are away from your second home.

  • Leave the system on at about 80°F, and below about 85°F, while the house sits empty in warm weather.
  • You can lower the setting before you arrive so the house is comfortable when you walk in.
  • Leaving it on helps keep moisture in check while you are away from your coastal home.
  • The EPA recommends keeping indoor relative humidity below 60% to limit mold growth in the house.

Setting the Thermostat Fan

Running the thermostat fan on AUTO lets moisture collected on the indoor coil drain away between cycles.

Allowing this water to drain naturally is a simple way to help manage the indoor climate while your coastal home sits empty. This setting supports the cooling system as it works to manage indoor humidity during warm weather.

If you leave the fan ON continuously, the system can blow some of that moisture back into the house. This choice works against the cooling cycles and can add moisture back to the indoor air. Keeping the fan set to AUTO helps maintain a drier indoor climate during warm weather on the coast.

Monitoring Your Coastal Property Remotely

A smart or Wi-Fi thermostat lets an owner watch temperature and humidity remotely, helping you protect your empty home from afar.

  • Use a smart or Wi-Fi thermostat to watch temperature and humidity remotely from afar.
  • Check the companion app periodically to confirm the indoor temperature remains at your raised setting.
  • Verify that the indoor relative humidity stays below 60%, ideally between 30% and 50%.
  • Look for unexpected temperature spikes that might indicate a power outage or a system failure.

What to Check When You Return Home

Inspect your second home upon arrival to check how the house held up while you were gone.

  • Look at the thermostat screen to confirm the current indoor temperature matches your raised setting.
  • Inspect vents and ceilings for any visible signs of condensation or early mold growth.
  • Check indoor spaces for any musty odors that might indicate high moisture levels.
  • Note any warm spots in the house that suggest the cooling system struggled.

Common questions

Can I just open the windows instead of running the AC?

Opening windows can let humid outdoor air in, so closing them and leaving the AC on at a raised setting is a helpful approach. This helps manage indoor moisture without letting damp coastal breezes inside.

Is 80°F too warm for an empty house?

No, a raised setting of about 80°F, and below about 85°F, helps keep moisture in check while the house is empty. This setting limits mold growth while you are away.

Do I need a smart thermostat for a rental property?

While not required, a smart or Wi-Fi thermostat lets an owner watch temperature and humidity remotely. This helps you catch issues like power outages or high moisture levels before your next guests arrive.

What should I do if I find warning signs upon arrival?

If you notice warm spots, musty odors, or visible mold, turn the system off at the thermostat and have it checked. Taking this step helps address any underlying issues with the cooling system.

Call Now Schedule Service