Skip to main content
Comfort Design Air Conditioning & Heating — HVAC in Port Aransas, TX
Learning Center · Troubleshooting

Emergency Heat vs. Auxiliary Heat on a Heat Pump Thermostat

This guide helps you understand your heat pump thermostat settings and decide when to use emergency heat in your coastal home.

Learn By the Comfort Design Air Conditioning & Heating team · Updated November 5, 2026

Quick answer

Auxiliary heat turns on automatically when the heat pump alone cannot keep up, while emergency heat is a manual setting you select if the heat pump breaks. Auxiliary runs alongside the heat pump, but emergency heat shuts the heat pump off entirely to use only backup heating.

What the AUX and EM HEAT Labels Mean

Your thermostat uses these two labels to indicate different ways your heating system uses its backup heat source.

The AUX label stands for auxiliary heat. This mode activates automatically to help the system warm your coastal home when the heat pump alone cannot keep up with the heating demand. It runs alongside your main equipment to keep the indoor temperature comfortable during chilly winter weather on the Gulf Coast.

The EM HEAT label stands for emergency heat. This is a manual setting that you must select yourself, which shuts the heat pump off entirely to heat with the backup only. You should only use this setting if the main heat pump has broken down and needs a repair.

How Auxiliary Heat Operates Automatically

Auxiliary heat kicks on by itself when the heat pump alone cannot keep up with the heating demand in your home.

  • In cold weather, the heat pump alone may not be able to keep up with demand.
  • The backup heating runs alongside the heat pump to help it reach your desired temperature.
  • It is normal for this backup heat to activate briefly during a cold snap.
  • The thermostat handles this switch automatically so you do not have to change any settings.

Why Auxiliary Heat Costs More to Run

When your thermostat says AUX, your system is usually using electric resistance heat strips, which cost more to run than the heat pump.

  • The system usually uses electric resistance heat strips for its auxiliary heating mode.
  • These heat strips require a large amount of electricity to generate warmth for your home.
  • Because of this, they cost more to run than the heat pump itself.
  • Relying on the heat pump as much as possible helps keep your utility bills lower.

When to Switch to Emergency Heat

You should only switch your thermostat to EM HEAT if your heat pump has stopped working and you are waiting for a repair.

Emergency heat is a manual setting you choose to shut the heat pump off entirely. It is meant for when the heat pump has stopped working, heating your home with the backup heat only until the main system is repaired and ready to run normally again on the Gulf Coast.

You should leave the thermostat in this emergency mode only until the heat pump is repaired. Because running on backup heat alone costs more than using the heat pump, you should avoid using this manual setting for your regular daily heating needs during cold weather on the Texas Gulf Coast.

Signs Your Backup Heat Is Running Too Much

Heavy backup use costs more and is worth having looked at if it runs constantly.

  • It is normal for the system to use backup heat during cold weather on the Gulf Coast.
  • Keep the thermostat on its normal heat or auto setting rather than EM HEAT unless the heat pump has stopped working.
  • If the AUX indicator stays on much more than before, turn the system off and have it checked.
  • If your electric bill rises without another explanation, you should also have the heat pump checked.

Common questions

Why does the auxiliary heat turn on when I adjust the temperature?

Auxiliary heat comes on automatically when you raise the setting several degrees at once. The heat pump alone cannot keep up with large adjustments, so it uses the backup heat.

Does the backup heat run during a defrost cycle?

Yes, auxiliary heat comes on automatically during defrost. The system uses the backup heat to keep your coastal home warm while the outdoor unit clears itself.

Are steam and a whoosh sound normal for a heat pump?

Yes, steam from the outdoor unit and a short whoosh when it switches are normal. A heat pump periodically runs a defrost cycle in cold, damp weather.

Should I switch to emergency heat during a winter freeze?

No, you should not use emergency heat just because it is freezing outside. The system handles cold weather automatically by bringing on the auxiliary heat when the heat pump alone cannot keep up.

Call Now Schedule Service